Pro Clear Gloss Lacquer Spray 400ml x12

Our Professional Clear Gloss Lacquer is designed to transform any surface into a showroom quality display. This high-performing lacquer offers a vivid, lasting shine that is perfect for highlighting the unique features of any room. Its quick dry time and excellent coverage enable you to polish up to four coats within hours for a glass-like finish. Not only is it long-lasting and resistant to abrasions, but it is also easy to apply and can be handled in as little as 10 minutes. Achieve your desired professional look in no time with our Professional Clear Gloss Lacquer.

This is product information only. To find your nearest supplier visit https://www.hampshiresheen.com/buy or to enquire about a trade partnership, use the contact link at the top of the page.
SKU: HSPCGL400 Category:

Description

~ Basic Application

    1. Sand your work down to at least 400 grit and ensure surface is free from dust, grease and moisture;
    1. Prepare the surface with a suitable sealer and ensure it has fully dried.
    1. Shake can with the cap on for at least two minutes before use. Protect lathe and surfaces;
    1. Avoid breathing spray – Use appropriate PPE and use in a well ventilated area;
    1. Apply light coats 200mm from the piece, giving time for the lacquer to dry between coats. Two to four coats is usually sufficient;
    1. Lightly cut back the lacquer between dry coats for an even finish;
    1. Under normal conditions, this Professional Lacquer can be mechanically buffed in under 3 hours.
    1. For a glass-like finish, use abrasive pastes

~ Uses

Use for finishing decorative wood-turned items on a lathe, flat woodwork or other items requiring a tough lacquer finish.

~ Colour and Aroma

Clear spray. Characteristic aroma of solvents and aerosols

~ Container

Supplied in a 400ml aerosol tin.

~ Storage

Store in a cool, dry place, ideally between 10° and 30°C (50° and 90°F) Where possible. Protect from extreme heat and freezing. Keep out of direct sunlight.

~ Longevity – Use By

Kept according to instructions, you can expect the product to last indefinitely. We recommend using the product within 12 months of purchase, though.

~ Food Contact and Toy Safe?

Unknown – product has not been tested.

SAFETY FIRST! Always read product labels, wear appropriate PPE and take steps to ensure the safety of your workshop environment and the people in it!

~ Product Label Warning

DANGER: Contains n-butyl acetate, Hydrocarbons, C9, aromatics, 4-hydroxy-4-methylpentan-2-one,2-methylpropan-1-ol. Flammable liquid and vapour, Causes serious eye damage, May cause respiratory irritation, May cause drowsiness or dizziness. Suspected of damaging fertility or the unborn child. Harmful to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.Wear protective gloves/ protective clothing/eye protection/ face protection.IF SWALLOWED OR IN EYES: Immediately call a POISON CENTER/doctor. Do not expose to temperatures exceeding 50 °C/122 °F. Dispose of contents/container in accordance with local regulations.

~ Product Warning Symbols

Product warning symbols are displayed on products to highlight the potential dangers of some of the contents of the products – this is usually the solvents. In many cases, the warnings are irrelevant once the solvent has evaporated.

~ Safety Data Sheet

~ Liability

As the manufacturer, we cannot know all the uses the product may be used for. It is the user’s responsibility to determine suitability of use. If in doubt, contact us for advice.

~ Basic Application

    1. Sand your work down to at least 400 grit and ensure surface is free from dust, grease and moisture;
    1. Prepare the surface with a suitable sealer and ensure it has fully dried.
    1. Shake can with the cap on for at least two minutes before use. Protect lathe and surfaces;
    1. Avoid breathing spray – Use appropriate PPE and use in a well ventilated area;
    1. Apply light coats 200mm from the piece, giving time for the lacquer to dry between coats. Two to four coats is usually sufficient;
    1. Lightly cut back the lacquer between dry coats for an even finish;
    1. Under normal conditions, this Professional Lacquer can be mechanically buffed in under 3 hours.
    1. For a glass-like finish, use abrasive pastes

~ Uses

Use for finishing decorative wood-turned items on a lathe, flat woodwork or other items requiring a tough lacquer finish.

~ Colour and Aroma

Clear spray. Characteristic aroma of solvents and aerosols

~ Container

Supplied in a 400ml aerosol tin.

~ Storage

Store in a cool, dry place, ideally between 10° and 30°C (50° and 90°F) Where possible. Protect from extreme heat and freezing. Keep out of direct sunlight.

~ Longevity – Use By

Kept according to instructions, you can expect the product to last indefinitely. We recommend using the product within 12 months of purchase, though.

~ Food Contact and Toy Safe?

Unknown – product has not been tested.

SAFETY FIRST! Always read product labels, wear appropriate PPE and take steps to ensure the safety of your workshop environment and the people in it!

~ Product Label Warning

DANGER: Contains n-butyl acetate, Hydrocarbons, C9, aromatics, 4-hydroxy-4-methylpentan-2-one,2-methylpropan-1-ol. Flammable liquid and vapour, Causes serious eye damage, May cause respiratory irritation, May cause drowsiness or dizziness. Suspected of damaging fertility or the unborn child. Harmful to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.Wear protective gloves/ protective clothing/eye protection/ face protection.IF SWALLOWED OR IN EYES: Immediately call a POISON CENTER/doctor. Do not expose to temperatures exceeding 50 °C/122 °F. Dispose of contents/container in accordance with local regulations.

~ Product Warning Symbols

Product warning symbols are displayed on products to highlight the potential dangers of some of the contents of the products – this is usually the solvents. In many cases, the warnings are irrelevant once the solvent has evaporated.

~ Safety Data Sheet

~ Liability

As the manufacturer, we cannot know all the uses the product may be used for. It is the user’s responsibility to determine suitability of use. If in doubt, contact us for advice.

Two coats will generally be enough over a properly sealed surface for a superb gloss finish. Use our Professional Sealer Spray for the best results. We recommend at least four coats and then polish with pastes and creams for a glass-like finish.
Overcoat with our Microcrystalline Wax for a smooth feeling and fingerprint-resistant top coat. Use in combination with our Intrinsic Colour Collection, sealers, oils and waxes to create your own finishing regime.

Two Minute Tutorial

Embed Code: <iframe width=”560″ height=”315″ src=”https://videopress.com/embed/NxVh8bvz” frameborder=”0″ allowfullscreen allow=”clipboard-write”></iframe> <script src=”https://videopress.com/videopress-iframe.js”></script>

~ Basic Application

    1. Sand your work down to at least 400 grit and ensure surface is free from dust, grease and moisture;
    1. Prepare the surface with a suitable sealer and ensure it has fully dried.
    1. Shake can with the cap on for at least two minutes before use. Protect lathe and surfaces;
    1. Avoid breathing spray – Use appropriate PPE and use in a well ventilated area;
    1. Apply light coats 200mm from the piece, giving time for the lacquer to dry between coats. Two to four coats is usually sufficient;
    1. Lightly cut back the lacquer between dry coats for an even finish;
    1. Under normal conditions, this Professional Lacquer can be mechanically buffed in under 3 hours.
    1. For a glass-like finish, use abrasive pastes

~ Uses

Use for finishing decorative wood-turned items on a lathe, flat woodwork or other items requiring a tough lacquer finish.

~ Colour and Aroma

Clear spray. Characteristic aroma of solvents and aerosols

~ Container

Supplied in a 400ml aerosol tin.

~ Storage

Store in a cool, dry place, ideally between 10° and 30°C (50° and 90°F) Where possible. Protect from extreme heat and freezing. Keep out of direct sunlight.

~ Longevity – Use By

Kept according to instructions, you can expect the product to last indefinitely. We recommend using the product within 12 months of purchase, though.

~ Food Contact and Toy Safe?

Unknown – product has not been tested.

SAFETY FIRST! Always read product labels, wear appropriate PPE and take steps to ensure the safety of your workshop environment and the people in it!

~ Product Label Warning

DANGER: Contains n-butyl acetate, Hydrocarbons, C9, aromatics, 4-hydroxy-4-methylpentan-2-one,2-methylpropan-1-ol. Flammable liquid and vapour, Causes serious eye damage, May cause respiratory irritation, May cause drowsiness or dizziness. Suspected of damaging fertility or the unborn child. Harmful to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.Wear protective gloves/ protective clothing/eye protection/ face protection.IF SWALLOWED OR IN EYES: Immediately call a POISON CENTER/doctor. Do not expose to temperatures exceeding 50 °C/122 °F. Dispose of contents/container in accordance with local regulations.

~ Product Warning Symbols

Product warning symbols are displayed on products to highlight the potential dangers of some of the contents of the products – this is usually the solvents. In many cases, the warnings are irrelevant once the solvent has evaporated.

~ Safety Data Sheet

~ Liability

As the manufacturer, we cannot know all the uses the product may be used for. It is the user’s responsibility to determine suitability of use. If in doubt, contact us for advice.

Additional information

Weight 5.5 kg
Dimensions 21.5 × 14.5 × 25.4 cm